All of our fast delivery counters are manufactured using 10mm thick glass.

All of our glass is toughened so breakages are unlikely to occur.

Doors can make a great confidence boost to customers choosing the best hygiene and freshness for the product.

The supplied doors lift out of the cabinet easily for cleaning or if the doors are not required in winter months. Doors are fitted into a factory bonded top channel and a bottom channel is supplied with high bond tape to allow you to easily fit to your countertop. They are supplied with edge buffers and handles.

Instructions for cabinet doors are in the downloads section towards the bottom of this product page.

The first thing for you to decide on your glass sneeze counter is the required size. (All of our measurements are in millimetres).

We have a number of pre-configured sizes for you to choose from.

Width - (W)  - Is how wide the unit is when viewed from the front.
Depth - (D) - Is how far the unit extends back when viewed from the side.
Height - (H) - Is the unit height when viewed from the front.

This section allows you to include any information you feel is relevant. Please note that while we will always do our best to accommodate your requests this will not always be possible. If you have any questions, please don't hesitate to contact us or visit our knowledge page.

Once you have designed your perfect custom glass sneeze counter, the page will automatically display the price of your unit.

You can choose to add shelves to your unit which will be permanently bonded in at the time of manufacture.

Full Depth Shelves are **mm less than the depth of the cabinet as standard.

Half Depth Shelves are **mm less than the depth of the cabinet as standard.

Shelf Spacing - You can specify the height of the shelves you add -

The first shelf space will be the distance between the underside of the top panel and the top of the shelf.

The second shelf space will be the distance between the underside of the first shelf and the top of the second shelf,

etc...   Remember that each shelf takes up 10mm in height and so does the top panel . So a 410 mm high counter with one shelf will have only 390mm of usable space inside.
our handy visual display shows what your cabinet will look like.

All of our counters are packed suitable for their method of delivery.  On our own vehicle the glass has an anti-scratch film attached and the edges protected with impact absorbing foam.
if being delivered by courier they are packed in the same way but are additionally boxed or strapped to a wooden pallet. On some occasions you may notice that the foam edge protection has been re-used - this is to allow us to cut down on our environmental impact and in no way compromises the safety of the units transport.

We offer four different foot finishes/installation options for your glass sneeze guard. Different foot choices will suit different situations, so we leave this up to you.

1. Customer Silicone fit to worksurface - just plain glass edges.
2. Clear VHB Tape (Very High Bond) pre-fitted to the counter bottom edges.
3. Discrete Rubber Foot pre fitted to the glass edges - allows repositioning of the counter if needed.
4. Aluminium Channel supplied pre-cut to fit the edges of the counter - allows a more permanent fixing of the counter to worksurface.

Please note, Futureglass will not as standard, carry out the installation work. If you require us to install the glass sneeze shield, then please contact us to see if this will be possible in your area. An installation fee will be charged.